Rhonmac-cnc        Additional Options

If the contents page does not show to the left of this window click, Contents Page Here

Now you can Buy using Debit or Credit Cards through Paypal, you do not need a Paypal account. 

Visa Mastercard PayPal CreditCard American Express Switch Solo Visa Delta Visa Electron

Electronic and Mechanical Kits.     Go here for shipping outside the UK.

X3 and BMD-25 conversion kits available

Mechanical Kits.

Starter Kits:

Convert your X-3 or BMD-25 milling machine using your existing lead screws.

Two entry level kits for the beginner, easy to install, all you need is a lathe and able to drill and tap some holes to mount the adaptor castings and stepper motors.

Convert your X-3 or BMD-25 milling machine using your existing lead screws. X-3 lead screw nuts are adjustable on the X and Y axis, the Z can be controlled by the backlash compensation in most software.

Kit SKX3-2. 2 axis kit

For Nema 23 or 34 size motors. All the parts you need to make the mechanical conversion of the milling machine using your existing lead screws. Complete with manual.

Kit contents (2 axis)

2 x Stepper Motor Adaptor castings

2 x Huco Coupling sets

Conversion Manual

Full Kit for only 66.90

 

Kit SKX3-3. 3 axis kit

For Nema 23 or 34 size motors. All the parts you need to make the mechanical conversion of the milling machine using your existing lead screws. Complete with manual.

Kit Contents.(3 axis)

3 x Stepper Motor Adaptor castings

2 x Huco Couplings,  set of Z axis timing belt and pulleys (2/1drive ratio)

Raw material for Z axis lead screw extension drive.

Ball Bearing

Conversion Manual

Full Kit for only 110.90

 

X-3 or BMD-25 milling machine Ball Screws and Ball Nuts Conversions.

Kit X3- 1. (parts as picture below but with 3 additional adaptor plates for Nema 23 motors)

For Nema 23 size motors. All the parts to make the mechanical conversion of the milling machine, using 16mm ball screws for all 3 axes,  together with all other mechanical components needed for the conversion. Includes Conversion manual. 

 

Full Kit for only 449.50

 

Kit X3- 2. For Nema 34 size motors.

A comprehensive kit with conversion manual, has all the materials necessary to carry out the mechanical conversion of an X-3 or BMD-25 milling machine. All is needed is to machine the components following the manual to achieve a high quality machine conversion.

Finished machined kits available. Please contact us for a quotation.

Kit Contents.(3 axis)

3 x Ball screws and ball nuts for X, Y, and Z axis,

3 x Stepper Motor Adaptor castings

2 x Huco Couplings,  set of Z axis timing belt and pulleys (2/1drive ratio)

Raw material for ball nut and bearing holders

Set of Bearings

Conversion Manual

Full Kit for only 449.50

 

 Electronics Kits.

    The electronic kits below use our `NEW` Stepper motor driver board (RM2DB) which is ideally suited to provide you with the means of controlling your new machine, carrying out a machine conversion or driving a robot, it is completely compatible with Mach2 and Mach3 software and other software able to give step and direction signals.

   The Breakout Board (RM1BB) provides an easy way of wiring your PC to the driver board and comes complete with LTP port cable.

Using our Breakout and Driver boards you could make a CNC lathe, milling machine or router, you will have to make up the mechanical drive system but see our mechanical component to make constuction easy.

Kit E-1.

2 axis CNC system for less than 120.00. Will drive Nema 23 and 34 size motors.

Kit Contents. (complete with Data sheets)

1 x Breakout Board RM1BB

2 x Driver Boards RM2DB

Driver board mounting feet

1 x LTP port cable

Only 109.00 Inc P & P & VAT

Kit E-2.

3 axis CNC system for less than 160.00. Will drive Nema 23 and 34 size motors.

Kit Contents. (complete with Data sheets)

1 x Breakout Board RM1BB

3 x Driver Boards RM2DB

Driver Board mounting feet

1 x LTP port cable

Only 159.00 Inc P & P & VAT

 

Kit X3- 3. The BMD-25 and X-3, 3 axis Electroncs kit. All the main parts to complete the machine conversion. Breakout board, 3 x Driver boards, motor drive cable plug and sockets, limit switch plug and socket. (other readily available components needed to complete the conversion eg, screws, cable, suitable enclosure etc,)

Select the Stepper Motors and Power Supply here.

Kit Contents.

1 x Breakout Board RM1BB

3 x Driver Boards RM2DB

1 x LTP port cable

4 x Limit Switches

All plugs and sockets needed

249.50 Inc P & P & VAT

 

Control over AC powered accessories can now be added to your Electronic Kits or Stepper Motor Drives with the addition of our `NEW` Relay Boards

 

Heavy Duty Stepper Motor Driver Kits.

We have redesigned our cnc drivers, to give improved power and control giving increased performance of your stepper motors combined with cooler running. With the added benefit of a more competitive price,

They will be available from September this year.

 

sales@rhonmac-cnc.co.uk
Solution Graphics

 

Our policy is one of continual improvement therefore specifications may change without notice. Pictorial representations are intended as a guide only and may vary depending on machine model or product offered.