Rhonmac-cnc Electronic Hardware:                 Additional Options

Go here for shipping outside the UK.

If the contents page does not show to the left of this window click, Contents Page Here

Now you can Buy using Debit or Credit Cards through Paypal, you do not need a Paypal account. 

Visa Mastercard PayPal CreditCard American Express Switch Solo Visa Delta Visa Electron

CNC Machine Drive Controllers.

New Lower Prices

Heavy duty Machine driver available from 2 to 4 axis as standard, 5 or 6 axis to special order.

This new range of controllers are built in our own workshops using the latest stepper motor drive technology and are easy to set up and use, completely pre-wired for Mach 3 or wired to the pin-out requirement that you want. Each controller comes with all the cables you require and connectors for your stepper motor cables.

Easy to set up and use, just connect your motors, limit switches, emergency stop to the sockets on the control box, connect to the printer port on your PC and start using your CAD/CAM software. All drive controllers are set up for Mach 3 unless otherwise requested.

Main features.

Self contained in a quality vented enclosure, complete with an appropriate power supply to suit the number of axes used.
Power supplies to suit the number of axis in each controller and are British Made to the relevant CE and other Standards.  Power supplies used, 2 axis 6amp, 3 axis 8.5amp and 4 axis 11.5 amps. all at 50Vdc
Internal axis driver 50Vdc at 4.2 amps each axis
Selectable steps (pulses/rev) 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000. selected by onboard DIP switches. Normally set to 1600. Please advise if you require a different setting.
Mains OFF/ON switch. Switch illuminates when switched on
Fused IEC power inlet socket at the back. Mains input 230Vac at 6 amps. Fuse with 6 amp fuse. Cable supplied
Powerful Cooling fan installed
Printer port cable. (additional 9 pin cable also supplied if auxiliary logic outlet option is purchased)
Internal logic wiring is pre-wired to suit Mach 3. Other pin-out wiring can be supplied to your specification.
Drive axes output socket on front of enclosure. Cable connectors supplied.
Emergency stop and limit switch input on the back of the controller. Cable connectors supplied.
Controller comes complete with all plugs and sockets to wire to your stepper motors and PC and including the power lead.
An external Emergency Stop can be fitted if required at a small extra charge

Model Types (illustrations not to scale, see sizes below)

        

2 Axis Lathe controller shown

Typical back panel arrangement (2axis controller shown)

 

3 Axis controller

Model Part No Enclosure Size Price
2 axis, lathe cnc driver DRV2L

DRV2M

205w x 280d x 135h  389.00
2axis mill cnc driver 205w x 280d x 135h 389.00
3 axis Milling machine cnc driver DRV3M 305w x 280d x 135h 449.00
3 axis Routing machine cnc driver DRV3R 305w x 280d x 135h 449.00
4 axis Milling machine, (4th axis driving rotary table) cnc driver DRV4M 305w x 280d x 135h 495.00
External Emergency Stop. wired into the logic circuit (wired as Mach 3 unless other wise requested) When used with our relay boards and wired as Mach3 the e-stop also stops the auxiliary functions if driven through our relay boards & Ac Auxiliary Drives E stop Fitted into the top face of the enclosure 39.90
9 Pin Socket outlet to provide logic signals to drive Auxiliary equipment (wired as Mach 3 requirements unless otherwise requested). See our relay boards. & Ac Auxiliary Drives  9Pin Aux Fitted to the rear panel 59.00

Prices include delivery, UK mainland.

Please note that Heavy Duty Controllers can be supplied as OEM items and can be branded as such as long as minimum order quantities of 5 are ordered. Front and rear panel designs to your specification

Auxiliary Equipment Control. Now Available

Ready built boxes coming for October/November with either 2 or 4 outputs. Can be driven from our new range of CNC Machine controllers.

Control over Spindle Motor, Coolant or other AC powered accessories, can now be added to your CNC machines, Electronic Kits or Stepper Motor Drives with the addition of our `NEW` Relay Boards Ac Output Drivers.

Stepper Motors:

Check out our Stepper Motor Prices, Super Deals, Super low prices for quality stepper motors.

    

    Hybrid Bipolar stepping motors with 1.8 Degree steps. Available in Nema 23 and 34 size, 4 wire configuration 2 phase, no need for rewiring 8 or 6 wire motors for Bipolar 4 wire connections.

    All the motors available are able to be driven from our Stepper motor driver board. Part No RM2DB or the Heavy duty Stepper motor controllers.

Motor leads are 120cm long allowing you to wire directly into your driver board (controller) saves using connectors.

Nema 23 size motors. Single Shaft                                                                    All back on stock

Part Number Motor Length Shaft Dia Step Angle Max Rated Volts/ Current/Phase Holding Torque Leads Price Each Buy Now
23HS6403 Single stack 56mm 6mm 1.8 40vdc/2.5amp/2 phase 100N.cm 4 22.39
23HS8404 Double stack 76mm 6mm 1.8 40vdc/4.2amp/2 phase 180N.cm 4 25.70
23HS1410 Triple stack 100mm 6mm 1.8 40vdc/4.2amp/2 phase 220N.cm 4 27.29

Nema 23 size motors. Double Shaft                                                                     All back on stock

Part Number Motor Length Shaft Dia Step Angle Max Rated Volts/ Current/Phase Holding Torque Leads Price Each Buy Now
23HS6403/DS Single stack 56mm 6mm 1.8 40vdc/2.5amp/2 phase 100N.cm 4 23.90
23HS8404/DS Double stack 76mm 6mm 1.8 40vdc/4.2amp/2 phase 180N.cm 4 26.90
23HS1410/DS Triple stack 100mm 6mm 1.8 40vdc/4.2amp/2 phase 220N.cm 4 28.29

Nema 23 stepper motor dimensions

 

Motor leads are 120cm long allowing you to wire directly into your driver board saves using connectors. Drawings are for guidance only, motors may vary slightly from that drawn.

Nema 34 size motors Single Shaft                                                                     All back on stock

Part Number Motor Length Shaft Dia Step Angle Max Rated Volts/ Current/Phase Holding Torque Leeds Price Each Buy Now
34HS6802 Single stack 63mm 10mm 1.8 80vdc/6.36amp 2 phase 250N.cm 4 31.19
34HS7802 Double stack 78mm 10mm 1.8 80vdc/6.4amp 2 phase 320N.cm 4 39.90
34HS4802 Triple stack 114mm 10mm 1.8 80vdc/7.0amp 2 phase 580N.cm 4 49.90

Nema 34 size motors Double Shaft                                                                    All back on stock

Part Number Motor Length Shaft Dia Step Angle Max Rated Volts/ Current/Phase Holding Torque Leeds Price Each Buy Now
34HS6802/DS Single stack 63mm 10mm 1.8 80vdc/6.36amp 2 phase 250N.cm 4 36.69
34HS7802/DS Double stack 78mm 10mm 1.8 80vdc/6.4amp 2 phase 320N.cm 4 42.90
34HS4802/DS Triple stack 114mm 10mm 1.8 80vdc/7.0amp 2 phase 580N.cm 4 52.90

Nema 34 stepper motor dimensions                                                                                            

                                        

Motor leads are 120cm long allowing you to wire directly into your driver board saves using connectors. Drawings are for guidance only, motors may vary slightly from that drawn.

Basic Wiring Diagrams 8 wire and 4 wire Stepper Motors

When wiring 8 wire stepper motors to run as Bipolar Join wires Yellow and Blue together and Purple and Brown together. (Colour codes relate to colours of leads in the left hand example below. Check your motor lead colours and phases). Red and Black then become Phase `A` and White and Green Phase `B`. NOTE, wire colour codes vary with different Stepper motor suppliers.

    8 Wire Stepper Motors                                Rhonmac-cnc 4 Wire Stepper Motors

               

 

sales@rhonmac-cnc.co.uk
Solution Graphics

Our policy is one of continual improvement therefore specifications may change without notice. Pictorial representations are intended as a guide only and may vary depending on machine model or product offered.