If the contents page does not show to the left of this window click, Contents Page Here
Now you can Buy using Debit or Credit Cards through Paypal
Go here for shipping outside the UK.
Special offers below until all stock is gone
|4inch swivel vise. Graduated swivel base||4swvise||£49.50|
|4inch swivel tilt vise Graduated tilt and swivel||4swtiltvise||£75.95|
Dust and water proof, gives clear bright light. Low volt with built in transformer.
Halogen Lamp Gooseneck fully adjustable flexible arm, 520 mm long gives
considerable adjustment. Complete with integral transformer and Halogen
|MT2 Revolving Centre Heavy Duty||MT2 HDRC||£26.90|
|MT3 Revolving Centre Heavy Duty||MT3HDRC||£29.50|
|MT2 Face Mill 4 tct cutting tips, regrindable/replacable||MT2FMill||£10.90|
|MT3 Face Mill 4 tct cutting tips, regrindable/replacable||MT3FMill||£10.90|
|R8 Face Mill 4 tct cutting tips, regrindable/replacable||R8FMill||£10.90|
|Boring Bars, set of 9. Shank 12mm diameter. Set of 9 Shank 1/2inch diameter Brazed on tct tip. Regrindable||9pce BBset 12mm||£11.00|
|9pce BBset 1/2in||£11.00|
|Boring Bars, set of 12, Shank 3/4 inch diameter Brazed on tct tip. Regrindable||12pce BBset3/4in||£17.50|
|MT2, 2 inch dia Boring Head for 12mm Boring Bars or 1/2in bars.||MT2 BH 12mmBB||£37.50|
|MT2 BH 1/2inBB||£37.50|
|R8, 2 inch dia Boring Head for 12mm Boring Bars or 1/2in bars.||R8 BH 12mm BB||£37.50|
|R8 BH 1/2in BB||£37.50|
Our policy is one of continual improvement therefore specifications may change without notice. Pictorial representations are intended as a guide only and may vary depending on machine model or product offered.